Advertisement
Quick Links
Quick Installation Guide
300Mbps Wi-Fi Router
TL-WR820N
If your internet connection is through an Ethernet
cable directly from the wall, instead of through a
modem, connect the Ethernet cable to the
router's WAN port, and skip steps 1, 2, and 3.
Power adapter
Connect the power
adapter to the router.
Verify that the
LED turns solid on before
continuing with the configuration.
Router
1
2
Connect the modem to the router's
WAN port via an Ethernet cable.
Turn off the modem, and remove
the backup battery if it has one.
Turn on the modem and then wait
about 2 minutes for it to restart.
Modem
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TP-Link TL-WR820N
Summary of Contents for TP-Link TL-WR820N
- Page 1 Quick Installation Guide Turn off the modem, and remove 300Mbps Wi-Fi Router the backup battery if it has one. TL-WR820N Turn on the modem and then wait about 2 minutes for it to restart. If your internet connection is through an Ethernet...
- Page 2 Log in to the web management page of the router, and go to the Network page to visit https://www.tp-link.com/support, or simply scan the QR code. check whether the WAN IP address is valid or not. If it is, go to Advanced > Quick...
Need help?
Do you have a question about the TL-WR820N and is the answer not in the manual?
Questions and answers