TP-Link TL-WR820N User Manual page 150

1 ) If you see the message
this is usually because windows configuration utility is disabled or you are
running another wireless configuration tool to connect the wireless.
2 ) Exit the wireless configuration tool (the TP-Link Utility, for example).
3 ) Select and right click
Computer Management window.
4 ) Expand Services and Applications
Zero Configuration
5 ) Right click Wireless Zero
6 ) Change Startup type
is Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Make sure your computer/device is still in the range of your router/modem. Move
closer if it is currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key. Usually you can only find it on the
label of your router.
2 ) If you cannot find the PIN or PIN failed, you may choose
security key
Key.
3 ) If it continues to show note of
to confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
Windows cannot configure this wireless
My Computer
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click
instead, and then type in the
Network Security Key
on Desktop, and select
> Services, and find and locate
Start and make sure the Service status
Wireless Password/Network Security
Mismatch, it is suggested
connection,
Manage to open
Wireless
Connecting using a
145