Translate Address And Port By Alg - TP-Link TL-WR820N User Manual

Chapter 4
To add a binding entry:
1 ) Click Add in the
2 ) Click VIEW CONNECTED DEVICES
enter the MAC Address
3 ) Click ADD.
4 8

Translate Address and Port by ALG

ALG (Application Layer Gateway) allows customized NAT (Network Address Translation)
traversal filters to be plugged into the gateway to support address and port translation
for certain application layer "control/data" protocols: FTP, TFTP, H323 etc. Enabling ALG
is recommended.
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced
Note: It is recommended to keep the default settings.
• PPTP Pass-through:
through an IP network and passed through the router.
Binding List section.
and IP Address
> Security > ALG.
If enabled, it allows Point-to-Point sessions to be tunneled
Configure the Router in Wireless Router Mode
and select the device you want to bind. Or
that you want to bind.
51