Ip & Mac Binding - TP-Link TL-WR820N User Manual

Chapter 4
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist
4 7 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device's IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Enable IP & MAC Binding
4. Bind your device(s) according to your need.
To bind the connected device(s):
Locate the ARP List
specific device.
or Whitelist.
Security > IP & MAC
and click SAVE.
section and enable Bind to bind the IP and MAC addresses of a
Configure the Router in Wireless Router Mode
Binding.
50