TP-Link TL-WR820N User Manual page 82

Chapter 5
2. Go to Advanced >
1. Tick the Enable checkbox.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click SAVE.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• To reserve an IP address for a specified client device:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
section.
3. Click Add in the Address Reservation
4. Click VIEW CONNECTED DEVICES
IP for. Then the MAC and IP Address
the MAC and IP address
Network > DHCP Server
> Network > DHCP Server
section.
and select the you device you want to reserve an
will be automatically filled in. You can also enter
of the client device.
Configure the Router in WISP Mode
and locate the DHCP Server
IP Address Pool.
Default Gateway is automatically filled in
and locate the Address Reservation
section.
Obtain an IP Address
77