TP-Link TL-WR820N User Manual page 33

Chapter 4
1. Tick the Enable checkbox.
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the router.
4. Click SAVE.
Note:
To use the DHCP server function of the router, you must configure all computers on the LAN as
automatically.
• To reserve an IP address for a specified client device:
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
section.
3. Click Add in the Address Reservation
4. Click VIEW CONNECTED DEVICES
reserve an IP. Then the
enter the MAC and IP address
> Network > DHCP Server
section.
and select the you device for which you want to
MAC and IP Address
of the client device.
Configure the Router in Wireless Router Mode
IP Address Pool.
Default Gateway is automatically filled in
and locate the Address Reservation
will be automatically filled in. You can also
Obtain an IP Address
28