Introduction - Micron AU8115MS Operator's Manual & Parts List

1. INTRODUCTION

This manual contains all information required to ensure successful application of
products for agricultural, public health and pest control using the AU8115MS vehicle
mounted sprayer. Full instructions and operation details are included along with all
necessary information required to maintain and repair the equipment and to identify
any spare parts.
The AU8115MS sprayer is designed for a wide range of agricultural, public health
and pest control spray tasks. It can be mounted in the rear of any pick-up truck or
other suitable vehicle, with all controls installed in the cab of the vehicle for
maximum operator safety.
The sprayer is designed around the proven Micronair AU8000 sprayhead. This uses
a rotary atomiser to produce spray droplets of a precisely controlled size. Control of
the droplet size minimises wastage of pesticide and ensures optimum penetration
and coverage of the target. This ensures flexibility over a wide range of application
parameters and products. The sprayer can be used for flow rates from 0.2 – 3.5
litres per minute.
The sprayhead is driven by a high velocity air stream produced by a blower powered
by a reliable 4 stroke engine with electric start. The air stream from the sprayhead
carries the spray droplets for a distance of up to 10 metres in still air and typically
enables a swath of 50 – 100 metres to be achieved when using a drift spraying
technique with a wind speed of 2 metres/second or more. The air stream also
ensures optimum penetration of dense foliage and carries all spray safely away from
the vehicle and its driver. The sprayhead is fitted in an adjustable mounting which
enables it to be directed towards the target to ensure optimum coverage.
The AU8115MS sprayer is operated from a control box in the vehicle cab. This
incorporates switches for the electric engine starter, engine throttle and pesticide
pump.
It is the responsibility of the user to determine the optimum application rate and
droplet size for the product mix being used. This information should then be used in
conjunction with the section on Calibration to determine the required atomiser flow
rate. It is important to read this manual carefully before using the sprayer.
MICRON AU8115MS VEHICLE MOUNTED SPRAYER