Using Engine Key Switch; Using Manual Engine Starter - Micron AU8115MS Operator's Manual & Parts List

5. If the machine is not required to spray immediately set the THROTTLE switch
on the control box to IDLE.

4.2.4. Using Engine Key Switch

1. If the engine is cold set the CHOKE lever on the engine to the CLOSED
position ( ).
2. Set the ENGINE switch on the control box to the central RUN position.
IMPORTANT: The engine will not start if the ENGINE switch on the control
box is set to the STOP position.
3. Set the THROTTLE switch on the control box to the ON position.
4. Turn the key switch on the engine fully clockwise to the START (
until the engine starts. Release the key switch and allow it to return to the ON
position as soon as the engine is running.
5. If necessary, return the CHOKE lever on the engine to the RUN position (
6. If the machine is not required to spray immediately set the THROTTLE switch
on the control box to IDLE.

4.2.5. Using Manual Engine Starter

1. Set the ENGINE switch on the control box to the central RUN position.
2. Set the key switch on the engine to the ON ( l ) position (key vertical).
IMPORTANT: The engine will not start if the ENGINE switch on the control
box or the key switch on the engine is set to the STOP position
3. Set the THROTTLE switch on the control box to the ON position.
4. If the engine is cold set the CHOKE lever on the engine to the CLOSED
position ( ).
5. Pull the engine starter cord gently until the compression of the engine is felt.
Release the cord so that it retracts fully and then pull again firmly to start the
engine. The cord should never be pulled fully out to the end stop as this will
strain the cord and the starter mechanism and could lead to premature failure.
If the engine does not start easily, move the choke to MID position. If the
engine still fails to start and the carburettor becomes flooded, set the choke to
the OPEN position and pull the starter cord at least 10 times before repeating
the normal starting procedure.
6. If the machine is not required to spray immediately set the THROTTLE switch
on the control box to IDLE.
MICRON AU8115MS VEHICLE MOUNTED SPRAYER
9
) position
).