40
Linking two networks
6.2
Instructions for LANconfig
Perform the configuration on both routers, one at a time.
a Launch the 'Connect two local area networks' wizard. Follow the wizard's
b The wizard will return a message to indicate that it has all the informa-
c After finishing the configuration of both routers, you can test the network
6.3
Instructions for WEBconfig
Perform the configuration on both routers, one at a time.
a a From the main menu, launch the 'Connect two local area networks' wiz-
|
|
LANCOM Office
|
instructions and enter the required information.
tion it needs. Close the wizard with Finish.
connection. Try to contact a computer in the remote LAN (e.g. with ping).
The LANCOM Office should automatically set up a connection to the
remote station and contact the required computer.
ard. Follow the wizard's instructions and enter the required information.