Environmental Water Systems EWS-1354-1.5 Quick Start Manual page 4

water conservation procedure - getting through the master programming
You will see the screens in the proper order in which they appear.
If not, press up or down button until you reach the correct screen read-out
From the Home screen
Press the shift and Up Button at the same time and hold for 5 seconds until screen changes
You will see seLect LangUage:
Press the extra cycle Button
You will see sYsteM tYPe:
singLe Unit
Press the extra cycle Button
You will see regen tYPe:
tiMecLk DeLaYeD
Press the extra cycle Button
You will see vaLve tYPe:
Press the extra cycle Button
You will see regenerant FLow:
Press the extra cycle Button
You will see reMote signaL:
start: oFF
Press the extra cycle Button
You will see DisPLaY ForMat:
Us-gaLLons
Follow the simple step by step instructions.
Make sure these screens read the factory default setting.
engLisH
4
2850
Down FLow
on to the adjustments you will need to make