Advertisement
Quick Links
www.gltc.co.uk
Northcote Wardrobe
with Toy Box Base & Shelf
L2988
Assembly Difficulty
easy - medium -
hard
two-person job
21/09/2017
Thank you for shopping with GLTC, we hope you enjoy having this
product in your home.
We know assembling furniture, toys or accessories is not everyone's favourite
way to spend their time, so we've tried to make assembling this item as quick and
painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail through the
whole process. But if it all feels a bit too much like hard work, then we do have
an assembly company we can recommend: the Flatpack Construction Company
offers a nationwide service and can be contacted on 0843 289 4951 or www.
flatpackconstruction.co.uk.
A few important pointers before you start:
•
Please read the instructions right through before you start, and check that all the
components have been included in the pack; we find separating all the hardware
into piles makes it easier to be sure that everything is present and correct.
•
Make sure you have the right tools. Allen keys are provided if required, but screw
drivers and other tools are not. You'll find details of the tools you need at the
beginning of the instructions.
•
It's a good idea to build the unit in the room where you are going to be using it, to
avoid the need to move it after it's been assembled.
•
Do not throw away any packing materials until assembly is complete, just in case
you accidentally discard smaller parts and hardware.
V3
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Great Little Trading Northcote Wardrobe with Toy Box Base & Shelf L2988
Summary of Contents for Great Little Trading Northcote Wardrobe with Toy Box Base & Shelf L2988
- Page 1 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and www.gltc.co.uk painless as possible.
-
Page 2: Safety Warnings
Safety Warnings: Customer Service: • Adult assembly required. • If you find that any components are missing or damaged, please do not begin assembly and do not use the item. Please contact GLTC Customer Services on • Unassembled product contains small parts which may present a choking hazard. 0344 848 6000 immediately. - Page 3 Component Check List: Hardware for Toy Box & Shelf Component Check List: Toy Box Surround 18x Cam Dowels Drawer Runners Surround - Sides (x2) Surround - Top 45mmL ‘L-Shaped’ for Drawer left & right recessed groove at top 18x Cam Locks 14mmDia Surround - Bottom Surround - Back Panel...
- Page 4 Component Check List: Top Shelf Unit Assembly: Toy Box Surround Shelf - Sides (x2) Shelf - Base Shelf - Back Please note: For correct positioning, the wheel on the runner should be furthest away from the recessed groove at the back on the panel and to be closest to the long straight edge of the panels.
- Page 5 Assembly: Toy Box Surround Ensure that each cam locks arrow is pointing towards the drill hole on the side edge of the component. Hardware for Step 2: STEP 2: Insert 4 x wooden dowels (#3) into the drill holes in the four STEP 3: corners of BOTH side panels (A).
- Page 6 Assembly: Toy Box Surround When in position, turn the When in position, turn the 2x cam locks (#2) on bottom panel (C) 2x cam locks (#2) on top panel (B) clockwise to lock clockwise to lock in in place. place. left left STEP 4:...
- Page 7 Assembly: Toy Box Surround STEP 8: Once the remaining side panel (A) is in position, push down firmly. Turn each of the four remaining cam locks (#2) clockwise to lock them. STEP 6: Gently, slide the back panel (F) into the recessed groove of the top and base panels, ensuring it is pushed all the way in to the groove on the side panel.
- Page 8 Assembly: Toy Box Drawer Ensure that each cam lock’s arrow is pointing towards the drill hole on the side edge of the component. Please note: The wheel on the runner should be at the end of the drawer panel with the Please note the positioning drill holes.
- Page 9 Assembly: Toy Box Drawer Hardware for Step 3: Ensure that each cam lock’s arrow is pointing towards the drill hole screw 35mmL 2x #4 35mm Screws 2x #2 Cam Locks on the side edge of the component. Please note the positioning of the runner wheels, they should be at the back of the drawer box.
- Page 10 Assembly: Toy Box Drawer STEP 6: Position the drawer front panel (H) over the top of the drawer box. Guide the cam dowels and On the inside of the drawer turn each of the four cam locks (#2) the wooden dowels clockwise to lock them.
- Page 11 Assembly: Top Shelf Unit STEP 2: Lay the shelf base panel (M) on a clean flat surface with the large circular drill holes facing up. Insert 4 x cam locks (#2) in the drill holes, with the arrows facing towards the smaller drill holes on the sides of the panels.
- Page 12 Assembly: Top Shelf Unit Please ensure that the 2x pilot holes to attach the anti-tip straps are on this side. Secure by turning the two bottom cam locks (#2) clockwise. left left Tighten the cam lock (#2) by turning clockwise on the back of panel N.
- Page 13 Assembly: Top Shelf Unit right Tighten the cam locks (#2) by turning clockwise on the back of panels N & M. STEP 6: Position the remaining shelf side panel (L) over the edges of base shelf panel (M) and shelf back panel (N) and guide the cam dowels and wooden dowels into the drill holes.
- Page 14 Component Check List: Hardware for wardrobe Component Check List: Wardrobe 1x Top 1x Base (recessed groove at top) (lip at top & bottom) 12x Cam Dowels 12x Cam Locks 45mmL 14mmDia 2x Magnetic 16x Wooden Dowels Door Catches 20mmL Central Wooden dowel 20mm 2x Side Panels Divider Panel...
- Page 15 Component Check List: Wardrobe Assembly: Wardrobe 2x Doors 2x Back Panels 2x Shelves 1x Pole STEP 1: Lay the 2x side panels (Q) on a clean flat surface with the drill holes and groove facing up, in the position shown. Hardware for Step 1: Insert 5x wooden dowels (#3) into the larger drill holes in BOTH side panels (Q) as shown above.
- Page 16 Assembly: Wardrobe Ensure that each cam lock’s arrow is pointing towards the drill hole on the side edge of the component. Hardware for Step 2: 12x #2 Cam Locks STEP 2: Take the top (O), base (P) and 2x support brackets (W) and place them on a clean flat surface with the large drill holes facing up. Insert 12x cam locks (#2) into the large drill holes.
- Page 17 Assembly: Wardrobe Hardware for Step 3: Hardware for Step 4: 2x #4 Magnetic Door Catch STEP 3: Position the magnetic door catches (#4) over the drill holes on either side of the central divider panel (R) as shown. STEP 4: screw 13mmL 4x #5 Round Head Screws Wooden dowel 20mm...
- Page 18 Assembly: Wardrobe When in position, turn the 2x cam locks (#2) on the unit top (A) clockwise to lock in place. left left When in position, turn the 2x cam locks (#2) on the unit base (B) clockwise to lock in place. STEP 5: STEP 6: Position base (P) over the left-hand side panel (Q) as shown, so that the recessed grooves on each panel are...
- Page 19 Assembly: Wardrobe When in position, turn the 1x cam lock (#2) on the bottom edge of support bracket (W) clockwise to lock in place. left STEP 7: Position 1x support bracket (W) over the left-hand side panel (Q) as shown (the cam bolts on the support bracket (W) will be facing away from the back of the part constructed unit.
- Page 20 Assembly: Wardrobe When in position, turn the 1x cam lock (#2) on the bottom edge of support bracket (W) clockwise to lock in place. left STEP 9: STEP 10: Place the central divider panel (R) between top (O) and base (P), maneuvering it so that the drill holes on Position the remaining support bracket (W) over the central divider panel (R) as shown.
- Page 21 Assembly: Wardrobe right When in position, turn the 6x remaining cam locks (#2) on the base, top and support bracket panels clockwise to lock in place. STEP 12: Position the remaining right-side panel (Q) over the unit. Guide the cam dowels and wooden dowels on the side panel into the drill holes on the edges of the top (O), base (P) and support bracket (W).
- Page 22 Assembly: Wardrobe Hardware for Step 13: Hardware for Step 11: screw 16mmL 8x #9 Shelf Pegs 12x #8 Flat Head Screws STEP 14: Hang the cupboard doors. (Please note, to attach the doors you may find it easier to position the unit on its STEP 13: side).
- Page 23 Position the 2x shelf panels (U) over the shelf pegs (#9) and press down firmly so that they are securely in separately with this item. place. Copyright© 2014 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Need help?
Do you have a question about the Northcote Wardrobe with Toy Box Base & Shelf L2988 and is the answer not in the manual?
Questions and answers