Advertisement
Quick Links
www.gltc.co.uk
Northcote Corner Shelf Unit
L2505
easy - medium -
hard
two-person job
Thank you for shopping with GLTC, we hope you enjoy having this
product in your home.
We know assembling furniture, toys or accessories is not everyone's favourite
way to spend their time, so we've tried to make assembling this item as quick and
painless as possible.
Hopefully our efforts will have been worthwhile and you'll sail through the
whole process. But if it all feels a bit too much like hard work, then we do have
an assembly company we can recommend: the Flatpack Construction Company
offers a nationwide service and can be contacted on 0843 289 4951 or www.
A few important pointers before you start:
•
Please read the instructions right through before you start, and check that all the
piles makes it easier to be sure that everything is present and correct.
•
Make sure you have the right tools. Allen keys are provided if required, but screw
beginning of the instructions.
•
It's a good idea to build the unit in the room where you are going to be using it, to
avoid the need to move it after it's been assembled.
•
Do not throw away any packing materials until assembly is complete, just in case you
accidentally discard smaller parts and hardware.
V2
15/02/2018
1
.
Advertisement
Related Manuals for Great Little Trading Northcote L2505
Summary of Contents for Great Little Trading Northcote L2505
- Page 1 Thank you for shopping with GLTC, we hope you enjoy having this product in your home. We know assembling furniture, toys or accessories is not everyone’s favourite way to spend their time, so we’ve tried to make assembling this item as quick and www.gltc.co.uk painless as possible.
-
Page 2: Safety Warnings
Safety Warnings: Customer Service: • • Adult assembly required. assembly and do not use the item. Please contact GLTC Customer Services on • Unassembled product contains small parts which may present a choking hazard. 0344 848 6000 immediately. • Children should be kept away from the product during assembly due to possible •... - Page 3 Component Check List: All Hardware You will need: (not supplied) 2x Top Panels 21x Cam Dowels 21x Cam Locks (left & right sides) 45mmL 14mmDia 18x Wooden Dowels 6x Shelf Fixings Philips Head Screwdriver 20mmL 15mmL 2x Side Panels (left & right sides) Component Check List: Corner Shelf Unit 2x Base Panels 4x Back Panels...
- Page 4 Assembly Hardware for Step 2: Hardware for Step 1: 3x #1 Cam Dowels 3x #2 Cam Locks 2x #3 Wooden Dowels left right left right Ensure that each cam lock’s arrow is When in position, turn the 3x pointing towards the drill hole on the side cam locks (#2) on the base edge of the component.
- Page 5 Hardware for Step 3: 2x #1 Cam Dowels 2x #3 Wooden Dowels Thin Part Wide Part STEP 4: STEP 3: Slide the thinner back corner bar (B) onto the hardware on the left hand side, making sure the side groove Turn the joined base panel (A) over.
- Page 6 Thin Part Wide Part left right When in position, turn the 2x cam locks (#2) clockwise to lock in place. STEP 6: Hardware for Step 6: with the grooves and large drill holes facing up. Hardware for Step 5: STEP 5: Insert 2x cam dowels (#1) and 2x wooden dowels (#3) into the 3x #1 Cam Dowels diagonal edge of the left hand top panel (C).
- Page 7 Hardware for Step 7: Hardware for Step 8: 2x #1 Cam Dowels 2x #3 Wooden Dowels 3x #2 Cam Locks STEP 8: Insert 2x cam dowels (#1) and 2x wooden dowels (#3) into the holes at the back corner of the top panel (C) as shown.
- Page 8 STEP 11: Hardware for Step 10: Slide the four back panels (E) into the two-person job inside grooves of the top panel (C) & base panel (A) as shown. 2x #2 Cam Locks Hardware for Step 12: 4x #1 Cam Dowels left side STEP 10: 4x #3 Wooden Dowels...
- Page 9 Hardware for Step 13: 4x #2 Cam Locks left side right side left side Hardware for Step 14: STEP 14: STEP 13: Take the two shelf panels (F) and lay them on a clean flat surface, Place the left side panel (D) onto the sides of the top and base panels (A with the large drill holes facing up.
- Page 10 Hardware for Step 15: Hardware for Step 16: 4x #4 Shelf Fixings 3x #2 Cam Locks left side right side left side Ensure that each cam lock’s arrow is When in position, turn the 3x pointing towards the drill hole on the side cam locks (#2) on the shelf edge of the component.
- Page 11 STEP 17: Hardware for Step 19: Place the shelf (F) inside the unit, with the small recesses on the shelf facing down. The shelf will rest on the four shelf fixings (#4). 4x #2 Cam Locks 2x #4 Shelf Fixings right side left side Hardware for Step 18:...
- Page 12 Turn the unit upright — your shelf unit is now ready to use. Please ensure you are using this unit with L2504 Northcote Corner Base Unit & Top Shelf Copyright© 2012 G.L.T.C. Ltd. All rights reserved. Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Need help?
Do you have a question about the Northcote L2505 and is the answer not in the manual?
Questions and answers