Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Amantii Panorama Series
Summary of Contents for Amantii Panorama Series
- Page 1 Replacing the Heater Panorama Series Models 40,50,60,72,88” Deep & Slim Models...
- Page 2 Replacing the Heater Panorama Series Models Unscrew the glass bracket. Use bracket as shown to hook the glass gently pulling towards you. Remove glass and set in a safe place.
- Page 3 Replacing the Heater Panorama Series Models Unscrew four screws located on each side and remove the bracket.
- Page 4 Take out the media tray and mirror glass as shown. Remove the media tray NOTE: It is recommended to use two people to remove the glass. There are two holes at each side behind the mirror glass. You can put your finger in and take out the glass.
- Page 5 Replacing the Heater Panorama Series Models Unscrew the part from the top panel You can see the top panel. The part show at Please unplug the internal wire. It is the picture. Unscrew 10 screws. Using the better take a photo before you do it.
- Page 6 Replacing the Heater Panorama Series Models Unscrew 6 screws and take out the bad heater. Replace a new one. Plug the internal wire back and screw back all the part.
Need help?
Do you have a question about the Panorama Series and is the answer not in the manual?
Questions and answers