GE Arize Element Top Light Installation Manual

GE Arize Element Top Light Installation Manual

Horticulture led lighting system
Hide thumbs Also See for Arize Element Top Light:

Advertisement

Quick Links

Arize Element
Horticulture LED Lighting System
Installation Guide
BEFORE YOU BEGIN / AVANT DE COMMENCER
Read these instructions completely and carefully. Lisez attentivement ces instructions dans leur intégralité.
For Commercial or Industrial use only
RISK OF ELECTRIC SHOCK
• Turn power off before installation, inspection, cleaning
or removal. And follow appropriate lock out/tag out
safety procedure.
• Properly ground electrical enclosure.
• Follow all National Electric Codes (NEC) and local codes.
• This product must be installed in accordance with the
applicable installation code by a person familiar with
the construction and operation of the product and the
hazards involved.
• The installation and associated structures are subject to
approval by the authority having jurisdiction.
• Use only with components identified in this document.
• Suitable for dry, damp, and wet locations; Do not
immerse any component.
• Wear suitable Personal Protective Equipment (PPE)
during installation/maintenance. Highly recommend
safety glasses, helmet and leather glove for luminaire
mounting.
• Luminaire design for Greenhouse only.
Suitable for operation in an ambient temperature
between 32°F (0°C) and 104°F (40°C).
40°C
A mechanical ventilation or cooling system is
required to maintain the temperature within the
0°C
growing space below 104°F (40°C) when the light
module is in operation.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
This Class [A] RFLD complies with the Canadian standard ICES-005. /CeDEFR de la classe [A] est conforme à la NMB-005 du Canada.
Top Light
TM
WARNING / AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUE
• Coupez l'alimentation avant l'inspection, l'installation ou
la désinstallation.
• Reliez correctement le boîtier électrique à la mise à la
terre.
• Suivre tous les codes électriques locaux applicables.
• Ce produit doit être installé selon le code d'installation
pertinent, par une personne qui connaît bien le produit
et son fonctionnement ainsi que les risques inhérents.
• L'installation et les structures associées sont soumises à
l'approbation des autorités compétentes.
• Utilisez uniquement avec les composants identifiés dans
ce document.
• Convient aux endroits secs, humides et mouillés. Ne doit
pas être immergé.
• Portez les équipements de protection individuelle
appropriés pendant l'installation et la maintenance.
L'utilisation de lunettes de sécurité, d'un casque et
des gants de cuir pour le montage du luminaire est
fortement recommandée.
• Luminaire conçu pour serres seulement.
1
Opération compatible avec un environnement à
temperature ambiante controlée entre 32°F (0°C)
et 104°F (40°C).
l'utilisation d'un système de contrôle de la
température sera nécessaire pour garder la serre sous
les 104°F (40°C) lorsque le luminaire est en function.

Advertisement

Table of Contents
loading

Summary of Contents for GE Arize Element Top Light

  • Page 1 Arize Element Top Light Horticulture LED Lighting System Installation Guide BEFORE YOU BEGIN / AVANT DE COMMENCER Read these instructions completely and carefully. Lisez attentivement ces instructions dans leur intégralité. For Commercial or Industrial use only WARNING / AVERTISSEMENT RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE •...
  • Page 2: Specifications

    Specifications Driver Specifications Driver Input Ratings Description Weight Voltage Current Power Factor 93064969 GEPSC070-210G-ADFNA 1.5kg (3.3 lbs) 120/208/240 VAC, 50/60 Hz 2.5/1.6/1.2 A > 0.9 93117154 GEPSC070-210G-AGJNA 1.5kg (3.3 lbs) 277V-480V 0.9A – 0.5A >0.9 Light Module Specifications LED Module Input Ratings Description Detailed description Weight...
  • Page 3: Important Guidelines

    Important Guidelines • Minimum 4 inch distance from lighting equipment to any combustible material. • Minimum 4 inch distance between light module and driver or other light module. • The light module shall be installed lens down with a minimum 5 inch distance to anything below. •...
  • Page 4 Installation Option A: Hang Luminaires on Horizontal Cable Option A Overview Structural member Drivers Support cable Inter-connection cables Turnbuckle Top Light Modules AC line 0.078 in. (2.0mm) < Cable diameter < 0.16 in. (4.0mm) See Page 5 for installation steps.
  • Page 5 Option A Installation Steps ATTENTION / ATTENTION • Installer is responsible for suspension cable assembly. • L’installateur est responsable de l’assemblage du câble de • Test cable with at least 5x luminaires weight. suspension. • Tester le câble avec au moins 5 fois le poids des luminaires. Structural member Structural member Stop sleeve...
  • Page 6 Installation Option B: Hang Luminaires on Vertical Cables Option B Overview Structural member Drivers Support cables Top Light Modules Inter-connection cable AC line 0.10 in. (2.5mm) < Cable diameter < 0.16 in. (4.0mm) See Page 7 for installation steps.
  • Page 7 Option B Installation Steps ATTENTION / ATTENTION • Installer is responsible for suspension cable assembly. • L’installateur est responsable de l’assemblage du câble de • Test cable with at least 5x luminaires weight. suspension. • Tester le câble avec au moins 5 fois le poids des luminaires. Structural member Ensure cable is secured by spring...
  • Page 8: Electrical Connections

    Electrical Connections Male Female AC line Light module Driver Secure locknut Driver Mate male connector from module with fe- male connector from DC output of driver. Secure blue lock nut by turning counterclockwise until tight ensuring water tight seal and good connection. Connect driver(s) to junction box.
  • Page 9: Connection Schematic

    Email us: horticulture.info@gecurrent.com GE and the GE Monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions.

Table of Contents