GE Arize Element Top Light Installation Manual page 7

Option B Installation Steps
• Installer is responsible for suspension cable assembly.
• Test cable with at least 5x luminaires weight.
Structural member
1
Loop two cables around a structural member and
secure ends with stop sleeves or wire clamps.
Inter-connection cable to driver
3
Connect light engines to drivers directly or
by using inter-connection cables (see next
section for details).
ATTENTION / ATTENTION
• L'installateur est responsable de l'assemblage du câble de
suspension.
• Tester le câble avec au moins 5 fois le poids des luminaires.
Stop sleeve
or
wire clamp
7
2
Loop opposite end of cables through top light
hangers and secure with stop sleeves or wire
clamps.
Ensure cable is
secured by spring
clips at each end of
the light fixture.