Table 3-12: Ieee 488.2 Common Commands - Tektronix IntelliFrame VX1410A Instruction Manual

Command Groups
IEEE 488.2 Commands
3–20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The IntelliFrame Mainframe supports the following IEEE 488.2 common
commands. Detailed information on the command begins on page 3–161.
Table 3–12: IEEE 488.2 common commands
Header
*CLS
*ESE[?]
*ESR?
*IDN?
*OPC[?]
*PSC[?]
*RST
*SRE[?]
*STB?
*TST?
*WAI?
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Description
Clears the SCPI and IEEE 488.2 event registers and the
Error/Event Queue.
Sets or queries standard Event Status Enable register.
Returns the contents of the Standard Event Status Register.
Returns the identification message of the mainframe.
Synchronizes command execution with the controller.
Sets or queries the power-on status clear flag.
Resets instrument settings to a default state.
Sets or queries the Service Request Enable register.
Returns the contents of the Status Byte Register.
Initiates an internal self test and returns a failure code.
Synchronizes command execution with the system controller.