Tektronix IntelliFrame VX1410A Instruction Manual page 151

STATus Subsystem
STATus:QUEStionable:VOLTage:ENABle
STATus:QUEStionable:VOLTage:ENABle?
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands
3–94
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Sets or queries the contents of the Voltage Enable register. Setting unused enable
bits does not generate an error; the bits are ignored.
If the power-on status clear flag is FALSE (see *PSC command on page 3–166)
at power on, the register value will be restored from nonvolatile RAM;
otherwise, the register value at power on is set to #H7FFF. Executing the
STATus:PRESet command sets the register value to #H7FFF.
STATus:QUEStionable:VOLTage:ENABle <Mask>
STATus:QUEStionable:VOLTage:ENABle?
<Mask>
{<NRf> | <Nondecimal Numeric>}
0 N #HFFFF
0
–222, "Data Out of Range"
You attempted to set the enable register to an illegal value.
None
Command: STAT:QUES:VOLT:ENAB #H3FFF
STAT:QUES:VOLT:ENAB?
Query:
Response: 16383
STATus:QUEStionable:VOLTage?
STATus:QUEStionable:VOLTage:CONDition?
STATus:PRESet
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
Query response
<NR1>