Safety Instructions; Using Your Appliance; After Use; Inspection And Repairs - Black+Decker LM2000 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
Intended use
Your BLACK+DECKER LM2000 lawn mower has been
designed for mowing grass. This appliance is intended for
consumer use only.

Safety instructions

Warning! When using corded applianc-
es, basic safety precautions, including
the following, should always be followed
to reduce the risk of fire, electric shock,
personal injury and material damage.
Warning! When using the machine the
safety rules must be followed. For your
own safety and bystanders please read
these instructions before operating the
machine. Please keep the instructions
safe for later use.
Read all of this manual carefully before
u
operating the appliance.
The intended use is described in this
u
manual. The use of any accessory
or attachment or the performance
of any operation with this appliance
other than those recommended in this
instruction manual may present a risk
of personal injury.
Retain this manual for future refer-
u
ence.

Using your appliance

Always take care when using the appli-
ance.
This appliance is not intended for use
u
by young or infirm persons without
supervision.
The appliance is not to be used as a
u
toy.
Do not allow children or animals to
u
come near the work area or touch the
appliance or power supply cord.
Close supervision is necessary when
u
the appliance is used near children.
Use in a dry location only. Do not allow
u
the appliance to become wet.
Do not immerse the appliance in water.
u
Do not open body casing.
u
6
(Original instructions)
There are no user serviceable parts
inside.
Do not operate the appliance in
u
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
To reduce the risk of damage to plugs
u
and cords never pull the cable to
remove the plug from a socket.
Before using, always visually inspect
u
to see that the blades, blade bolts
and cutter assembly are not worn or
damaged. Replace worn or damaged
blades and bolts in sets to preserve
balance.
In order to avoid a hazard due to inad-
u
vertant resetting of the thermal cut-out,
this appliance must not be supplied
through an external switching device,
such as a timer, or connected to a
circuit that is regularly switched on and
off by the utility.

After use

When not in use, the appliance should
u
be stored in a dry, well ventilated place
out of the reach of children.
Children should not have access to
u
stored appliances.
When the appliance is stored or trans-
u
ported in a vehicle it should be placed
in the boot or restrained to prevent
movement following sudden changes
in speed or direction.

Inspection and repairs

Before use, check the appliance for
u
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may af-
fect its operation.
Do not use the appliance if any part is
u
damaged or defective.

Advertisement

Table of Contents
loading

Table of Contents