Yard force EW U15 Instruction Manual page 20

Table of Contents

Advertisement

NOTE: The pressure washer cannot dispense detergent in high pressure mode.
CAUTION! Before using the pressure washer to clean patio paving slabs it is
advisable to test a small area first, the use of a pressure washer could damage the
surface.
AFTER USE
- Set the ON/OFF switch to OFF position.
- Turn off the water supply.
- Disengage the trigger lock.
- Squeeze the gun trigger and discharge the residual pressure inside the hoses.
- Engage the trigger lock.
- Disconnect you garden hose.
NOTE: If the residual pressure in the lance and pressure hose are not fully released, the high
pressure hose will NOT be able to be unscrewed from the main unit or the spray gun.
OPERATION
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents