Ip & Mac Binding - TP-Link TD-W9970 User Manual

Chapter 10
3 ) Enter the Device Name
information from
network.)
4 ) Click OK.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist
10. 4. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
a network device's IP address to its MAC address. This will prevent ARP spoofing and
other ARP attacks by denying network access to a device with a matching IP address in
the Binding list, but an unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you
set for the router.
2. Go to Advanced
3. Bind your device(s) according to your needs.
• To bind the connected device(s)
1 ) Select the device(s) to be bound in the
and MAC
Online Devices
or Whitelist.
> Security > IP & MAC Binding
Address. (You can copy and paste the
table if the device is connected to your
and enable IP & MAC
ARP List.
Network Security
Binding.
41