Specifying The Correct System Type; Editing The System Name; Programming System Options; Editing The System Quick Key - Uniden BCT15 Owner's Manual

Specifying the Correct System Type

In order for trunk tracking to work properly, you have to specify the correct system
type when you create the system. Here are some tips for selecting the correct
type:
Use online resources, such as the www.radioreference.com database, to identify
the system type.
Even though a system has digital channels, it is not necessarily a P25 system.
Note that the BCT15 is not designed to process P25 signals.
These should be entered as Motorola 800 Standard and not P25.
EDACS Wide is the same as EDACS Standard.
EDACS Networked sites are EDACS Narrow

Editing the System Name

[MENU]
Program System
Select the system
Edit Name
To enter a letter, turn the Scroll Control (
To enter a decimal point, press [.No]. To move the cursor to the left, press [4]. To
move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [E

Programming System Options

Editing the System Quick Key

[MENU]
Program System
Select a conventional system
Edit Sys Options
Set Quick Key
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press
78
F
F
F
F
] or
YES
F
F
F
) until the character you want appears.
.
F
MELCS
C
F .