Entering/Editing Motorola Channel Groups; Entering/Editing Motorola Channels - Uniden BR330T Owner's Manual

• You can also turn this setting on or off by holding
on a trunked system, then pressing
Entering/Editing Motorola Channel
Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Setting Up a Channel Group
Program System
Menu
Select the system
Edit Group
The scanner creates a group with a default name of
Group nn. nn increments by one for each new group
you create within a system.
Next, refer to the appropriate section to set group-wide
options:
• See "Entering/Editing the Group Name" on
Page 89
• See "Setting the Group Quick Key" on Page 90
• See "Deleting Groups" on Page 91
• See "Copying Systems" on Page 89
• See "Entering/Editing Motorola Channels" on
Page 72
• See "Setting I-Call (Motorola and EDACS Sys-
tems Only)" on Page 85

Entering/Editing Motorola Channels

Program System
Menu
Select the system
Edit Group
Select the group
Edit Channel
New Channel
72
+ E.
Func