Setting The Maximum Auto Store Value; Setting The Modulation Type; Setting Attenuation - Uniden BR330T Owner's Manual

Off The scanner does not try to find the output
frequency.
Setting the Maximum Auto Store
Value
Srch/CloCall Opt
Menu
Max Auto Store
This value sets how many hits the scanner will
automatically store when it is in either Search and
Store or Close Call Auto Store mode.
Use the number keys to enter a value from 1 - 256,
then press the scroll control.
When the scanner reaches the maximum number of
hits you set, it stops the auto-store operation.

Setting the Modulation Type

Srch/CloCall Opt
Menu
Set Modulation
This setting controls the modulation type used for
quick search and Close Call operations. Select your
setting, then press the scroll control.
Auto Uses the default setting for the current
frequency (see the table at the front of the manual)
Uses AM (amplitude modulation)
AM
FM Uses FM (frequency modulation)
NFM Uses narrowband FM
WFM Uses wideband FM

Setting Attenuation

Srch/CloCall Opt
Menu
Set Attenuator
114