Using Menu; Using Func - Uniden BR330T Owner's Manual

- appears to show signal strength (0 to 5).
REP - appears when repeater find is turned on.

Using Menu

Func
Menu
Press on the left side of the scanner to enter the
Menu
menu. See "Using the Menu" on Page 49 for more
information about the scanner's menu options.

Using Func

To select the function labeled below a key on the front
of the scanner, hold down
scanner, then press that key. To hold on a system
while scanning or temporarily stop on a channel while
searching, press
Func
Scan Hold mode, hold down
control.
on the left side of the
Func
. To select a system in Scan or
and rotate the scroll
Func
Setting Up Your Scanner
41