hit. The scanner displays CC Found! Press
Any Key. When you press a key, the
frequency appears.
Turn the scroll control to display an option, then
press the scroll control.
• Set CC Alert: Lets you select how the
scanner alerts you when it receives a Close
Call signal. You can select any of the following
options.
Select Mode
•
Beep (the scanner beeps when it receives a
Close Call signal)
•
Light (the backlight turns on when it
receives a Close Call signal)
•
Beep+Light (the scanner beeps and the
backlight turns on when it receives a Close
Call signal)
•
None (the scanner does not alert)
Select Beep
•
Off (the scanner does not beep)
•
Alert 1-9 - (the scanner sounds an alert
beep to notify you of a Close Call hit. When
you select an alert level, the scanner
automatically enters the setting of the Alert
volume level. You can choose different beep
types.)
Set CC Pause: Lets you select how long the
scanner waits after a hit before it returns to the
previous operation.
•
3/5/10/15/30/45/60 sec.
•
Infinite.
Turn the scroll control to display an option, then
press the scroll control to select it.
Using the Close Call Feature
109