Trunking Activity Indicators - Uniden BCD996T Owner's Manual

If you enter a frequency then press [E
Grp group in a system called Qck Save Cnv Sys. These groups are created if
they do not exist. Then, the scanner prompts you to save other channel settings.
If you enter a talk group ID then press [E
group named Qck Save Grp in the current system. If the talk group ID's format is
not the type used by the current system, the scanner displays an error message
and does not save the talk group ID.
If you pressed [.No] in Step 3, the scanner prompts you to select the system and
the group where you want to store the frequency or talk group ID.
Note: The scanner will warn you if you try to store two channels in the same
system that have the same frequency or Talk Group ID or if you try to store two
systems with the same name.

Trunking Activity Indicators

To get a visual indication of the activity on trunking systems, press
[HOLD/RESUME] to hold on any channel. Then tap
scanner replaces the third line on the display with trunking activity indicators.
When the scanner is monitoring on EDACS or Motorola system, the activity
indicators will show which system frequencies have activity.
Note: For Motorola systems you must program all system frequencies (control and
voice frequencies) for this feature to work.
50
], the scanner stores it in the Qck Save
YES
], the scanner stores it into a channel
YES
F
Trunking Activity Indicators.
and then press [.No] The