Table of Contents
Advertisement
F
To use
tap the Scroll Control. This action is written in shorthand as
fully explained in the next section. When you tap the control f appears and
remains in the upper left corner of the display for 3 seconds. During this time,
press any button to access the button's second function. Or, press and hold the
Scroll Control for 2 seconds. The scanner beeps, and the function is "latched" so
that is does not return to normal mode until you tap the Scroll Control again. f
flashes at approximately 1 second intervals.
If you select Function while scanning, the BCD996T continues to scan, but holds
on the current system until the function operation is cancelled.
How the Scanner's Controls Are Represented in This
Manual
To help navigate the scanner's menus, the steps shown in this manual show the
displays you see and the keys you press or control you operate to get a desired
result. We use a form of shorthand symbols to save space.
The following example shows you how to use the scanner's menu to edit an
existing system name. It shows you the key to press in brackets [MENU] to select
a menu option and the option you see on the LCD in Boldface Courier type
(Program System) when you press [MENU]. It also instructs you to turn the
Scroll Control (shown as
Scroll Control (the shorthand action shown as
Name.
[MENU]
Program System
Select the system
F
Edit Name
Entering Text Within A Menu Option
To enter a letter, turn the Scroll Control (
character you want appears. To move the cursor to the left, press [4]. To move the
cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] three
times.
To accept an entry, press
To cancel an entry, press [MENU].
18
) to view a series of choices then press or tap the
F
F
Then, edit the system name.
F
or press [E
F
to enter a choice such as Edit
) until the letter, numeral or other
].
YES
F
which is
Advertisement
Table of Contents
