5/6 Tx Tone Selcall Programming - Uniden UH015sx Owner's Manual

UNIDEN Model uh015sx UHF CB Radio
Selective Calling

5/6 TX Tone Selcall Programming

1. Press .
TCAL
The TX Selcall Code will be displayed. (factory default :00000)
Use or to select the digit position.
SCAN POL
The selected digit will flash.
Rotate the Channel Selector to change the active digit value.
When finished, transmit the TX Selcall Code by pressing the microphone
for 2 seconds.
2. Selecting 5 or 6 Tone Format.
From 5 or 6 Tone Format Setting
While the 5th digit is flashing, press
A space bar [ _ ] will appear and flash.
Assign a Selcall number to this position using the Channel Selector.
When finished, transmit the TX Selcall code by pressing the
.
POL
TCAL
21
button
TCAL
for 2 seconds.