60 Rx Channels; Manual Programming; Copying A Police Frequency To A Rx Channel - Uniden UH015sx Owner's Manual

UNIDEN Model uh015sx UHF CB Radio
Operation

60 RX Channels

The uh015sx has 60 receive only channels (CH41 to CH100) which can be
programmed with frequencies ranging from 400-512MHz (in 12.5kHz steps).
If you know the frequency you may store it manually or you may copy a Police
frequency to a channel or you may use the search function to find an active frequency
and copy it to a channel.

Manual Programming

Turn power off. Press and
hold while turning
MON
power back on.
The channel indicator flashes
the lowest available empty
channel. You may use
the rotary knob to select
another channel.
Press . The first digit of the frequency indicator flashes. Turn rotary knob to
MENU
select first digit. Press
and turn rotary knob to change digits.
When finished press
MENU
select next channel for programming or press and hold
A confirmation tone sounds. The channel is also entered into OS scan memory.
Deleting a programmed RX Channel frequency:
Follow the steps in Manual Programming to enter a frequency for a desired channel.
Select 0 for the first frequency digit and then press
select another channel or press and hold
mode.

Copying a Police frequency to a RX Channel

Select the Police channels group by
pressing then select a desired
POL
frequency using the rotary knob.
Press and hold . The lowest
MENU
available empty channel will appear,
alternating with the selected Police
frequency. You may change the channel
using the rotary knob if you desire.
Press /ENTER to store the
MENU
frequency to the channel.
The new setting is stored and the
uh015sx returns to Police CH.
MENU SCAN SRCH
ENTER OS/GS BAND/TSQ
or to move left or right between digit positions
SCAN POL
/ENTER, the channel indictor flashes. Turn rotary knob to
/ENTER to exit programming
MENU
MENU
ENTER
14
MON HOLD POL
SQL DCS/CTCSS MEM
/ENTER to store setting.
MENU
/ENTER. Turn rotary knob to
MENU
SCAN SRCH MON HOLD
OS/GS BAND/TSQ SQL DCS/CTCSS
POL
MEM