Receiver Selcall Id; Programming Your Selcall Id - Uniden UH015sx Owner's Manual

UNIDEN Model uh015sx UHF CB Radio
Reciever Selcall ID

Programming Your Selcall ID.

To programme your own receiver Selcall ID.
1. Press and hold
MENU
2. The initial display and status will appear on the screen (factory default is 00000).
MENU
3. When the key is pressed while in this condition , the last digit will
begin to flash.
4. Use or
SCAN POL
5. Rotate the Channel Selector to change the active digit value.
6. When finished, press
MENU
7. Press /ENTER for 2 seconds to exit. The radio returns to normal
operation.
-or-
Turn the Channel Selector to go to the next programmable parameter.
then turn power on.
to select the digit position. The selected digit will flash.
MENU /ENTER to store . Three successive beeps are heard.
24