Roger Beep; Selecting Channel; Transmitting A Call Tone - Uniden uh078sx Operating Manual

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission). Roger Beep can be heard through the speaker when
Key Beep is on. Roger Beep is transmitted even if key beep is turned off.
However Roger Beep will not be heard from the speaker.
1. Press six times.
2. Press or
3. Press and hold

SELECTING CHANNEL

Press or to select the desired channel.
If you press and hold the
channel number will scroll rapidly.

TRANSMITTING A CALL TONE

Your uh078sx is equipped with 5 selectable call tones that will be
transmitted when
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted
within one minute then an error tone will sound.
1. Press three times. The current setting flashes.
2. Press or
between C1, C2, C3, C4 and C5.
3. Press and hold
and current setting flashes.
to change setting ON/OFF.
to store setting.
or
is pressed.
to change setting
to store setting.
9
,