Operating The Uh013 In Duplex Mode; Scanning; Open Scan (Os) Mode - Uniden UH013 Owner's Manual

UNIDEN Model UH013 UHF CB Radio
Operation

Operating the UH013 in Duplex Mode

For this example we are adopting CH01 as the channel being used in your area for repeater use.
Press and hold for 2 seconds to switch
DUP
Duplex ON. The DUP icon appears.
If Duplex is not required - press
2 seconds again to switch Duplex off.
Only channels 01 - 08 are available for Duplex
Check with your local Retailer for
NOTE
information on available Repeaters.

Scanning

The UH013 has a scanning feature that allows you to search for active channels automatically.
Furthermore, the UH013 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow you to use the radio more effectively.
Press and Scanning starts. The SCN
SCAN
icon appears.
Press again to stop scanning.
SCAN

Open Scan (OS) Mode

Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning
will stop on that channel.
This example shows CH40 active.
If the received signal ceases, the unit will wait 3 seconds for the signal
to return, otherwise scanning resumes.
To skip the active channel, press
or the PTT button on the microphone.
If SCAN is deactivated while on an
active channel, the UH013 will stay on
that active channel. If no channels are
active, the UH013 will reinstate the
NOTE
starting channel.
and hold for
DUP
MON SCN GS BCL INS
SLT
SRCH
TSQ
MON
SLT
SRCH
TSQ
momentarily. Scanning resumes. To deactivate SCAN, press
MEM
10
CAL TSQ DUP
SRC HLD SQT M
MHz
SCAN MEM
OS/GS DUP
CAL TSQ DUP
SCN GS BCL INS
SRC HLD SQT M
MHz
SCAN MEM
OS/GS SET/SKIP
DUP
CAL TSQ DUP
MON SCN GS BCL INS
SLT SRC HLD SQT
OS Mode is indicated by the absence of
NOTE
the GS icon.
VOL
S/RF
INST SQT
SET/SKIP CTCSS
S/RF
INST SQT
CTCSS
VOX
CTCSS
M
MHz
SCAN
S/RF