Ctcss (Continuous Tone Coded Squelch System); Wide Band Scanning - Uniden UH013 Owner's Manual

UNIDEN Model UH013 UHF CB Radio
Operation
C T C S S (Continuous Tone Coded Squelch System)
Turn the Rotary Channel Selector to the desired
channel to use CTCSS. Press and hold
for 2 seconds. CTCSS icon flashes.
SQT
Turn the Rotary Channel Selector to select the
desired CTCSS code 01 - 38. Press
once to store the new setting.
Channels 05 and 35 are Emergency Channels
and channel 11 is a Calling Channel.
NOTE
CTCSS cannot be selected on these channels.

Wide Band Scanning

The UH013 can also scan a wider band of frequencies (Step: 12.5 KHz).
Band Frequencies
A 400 MHz - 420 MHz
B 420 MHz - 450 MHz
C 450 MHz - 470 MHz
D 470 MHz - 512 MHz
1. Press once.
SLCT
2. Turn the Channel Selector to select
3. Press and hold
SLCT
store the new setting.
Searching of band A will immediately begin.
SQT
.
for 2 seconds to
Rotary
Channel
Selector
SLCT SRCH SCAN
TSQ
STORE OS/GS
If a button is not pressed within 10
seconds the UH013 will automatically
NOTE
exit Select Mode.
Transmission is not possible on wide band
NOTE
frequencies.
CAL TSQ DUP
WS
Rotary
MON SCN GS BCL INS
Channel
Selector
SLT SRC HLD SQT M
SLCT SRCH SCAN
TSQ
STORE OS/GS
13
CTCSS
MHz
MEM INST
DUP SET/SKIP
MEM INST
DUP SET/SKIP
SQT
CTCSS
SQT
CTCSS