Uniden SPH 516D Operating Manual
Uniden SPH 516D Operating Manual

Uniden SPH 516D Operating Manual

Portable radios

Advertisement

Quick Links

W I R E L E S S C O R P O R A T I O N
7100 Technology Drive
West Melbourne, FL 32904
©2000 RELM Wireless Corporation. All Rights Reserved
CC OG 22
ULUD01066BZ
RELM WIRELESS CORP.
7100 Technology Drive
West Melbourne, FL 32904
CC OG 22
SPH 516D
SPU 416K

Operating Guide

Advertisement

Table of Contents
loading

Summary of Contents for Uniden SPH 516D

  • Page 1: Operating Guide

    SPH 516D SPU 416K W I R E L E S S C O R P O R A T I O N Operating Guide 7100 Technology Drive West Melbourne, FL 32904 ©2000 RELM Wireless Corporation. All Rights Reserved RELM WIRELESS CORP.
  • Page 2: Safety Information

    (b) the damage or defect is caused by charging or using the battery in equipment or service other than the Uniden product for which it is Do not operate the transmitter of any radio equipment specified.
  • Page 3: Table Of Contents

    DTMF Encode Mode ........11 Manual Dial ............. 11 Auto Dial ............11 Memory Dial ............ 11 Battery Save ..........12 Function Tone ..........12 Options ..............12 - 12- - 1 - SPH 516D SPU 416K SPH 516D SPU 416K...
  • Page 4: Introduction

    1. Press the DTMF keys to enter the desired DTMF code The SPH 516D operates in the 150 to 174 MHz range and press the * key. 2. Press the PTT button and and has a maximum RF power output rating of 5 watts.
  • Page 5: Unpacking

    – Trickle Charger (APX121) – Rapid Charger (APX101) Note: Either battery charger may be purchased separately. If any of these items are missing from the box, contact your representative for help. - 10- - 3- SPH 516D SPU 416K SPH 516D SPU 416K...
  • Page 6: Controls And Indicators

    TRANSMIT The nominal transmit power output level is 5 watts for the SPH 516D and 4 watts for the SPU 416K. To switch to low power, press the HI/LO switch. LO appears on the LCD and the transmit power output level is changed to 1 watt.
  • Page 7: Front Controls

    Lock Out (L/O) button. The locked-out channel blinks. To remove the lock-out condition from a channel, manually select the channel and press L/O button again. - 8 - - 5- SPH 516D SPU 416K SPH 516D SPU 416K...
  • Page 8: Side Controls And Connectors

    Battery Information The SPU 416K and SPH 516D comes with either a standard or heavy duty rechargeable Battery Pack. Installation Before installing or removing the rechargeable Battery Pack, be sure that the power (ON/OFF Volume control) is turned off.

Table of Contents