Radio Id Programming - Uniden Sundowner UH-100 Owner's Manual

Radio ID Programming
To program your own Radio ID, perform the following procedure.
From the main menu, using the... or T key, go to the Radio ID Programming Menu.
(If you have never changed this parameter, the Radio ID 00000 will be displayed)
.
C-JI
1IQ
Press the MEM key to start programing. The last digit of the Radio ID will flash. This
indicates that you can now enter your new Radio ID.
The flashing digit is the one you can change. To select another digit, use the ~ or ~ to
move position.
TSQ ,- I
-
DDDQlK
L LI
IS
CH
@
4
~~S>
~
To change the flashing digit value, use the... or T key.
When completed, press the MEM and the new Radio ID will be stored into the memory.
34