Indicators - Uniden Sundowner UH-100 Owner's Manual

8. SCANCONTROL(SCN)
-
Press to activate Normal OS/GS scanning or press and
hold to enable Seek Mode OS/GS Scanning.
9. MEMORY CONTROL (MEM) - Places channel numbers into the memory scan list
(OS or GS).
10. AUDIO SCRAMBLER
I
TONE SQUELCH CONTROL - Controls access to audio
scrambling feature and Tone Squelched operation (Quiet Mode).
Indicators
6
m
CA:J
MEM TS~
'
~
I
'
~
I
DUP
f I
GS
SRF...1 SC
11
~
11
~
1
Cl Cl Cl Cl Cl Cl PRI
DDD.DDD,MHz
I
~ ~
11. Channel Indicator
- ,Indicates the channel number currently selected. On TX
SELCALL usage the Channel Indicator becomes a Memory location indicator.
12. Scan Indicator (SCN) - SCN icon appears when Normal Scan mode is activated.
When Seek Mode Scanning is selected the SCN icon blinks.
13. Priority Indicator (PRI)
-
Indicates that Priority channel is active when continuously
lit or Flashes when it is regularly being checked for activity while GS scanning.
14. Frequency I SELCALL
ID
Indicator - Shows the frequency of the current selected
channel. The Frequency Indicator changes to SELCALL ID display when using the
SELCALL feature.
15. RECEIVE SIGNAL I RF LEVEL Indicator (S I RF) - Indicates the relative signal
strength level when receiving (S) or the relative transmit power (RF) when
transmitting.
16. DUPLEX
Indicator
(DUP) - The DUP icon appears when duplex operation is
selected.
17. TRANSMIT Indicator (TX) - TX appears when the PTT button on the microphone
is pressed and the radio is transmitting. The RF icon also appears at this time.
18. CALL
Indicator
(CAL) - The CAL icon appears when the UH-100 radio is called
using SELCALL. It also appears when SELCALL codes are being transmitted.
19. SCRAMBLER
Indicator
(f)
-
The
f
icon appears when the Voice scrambler is
activated.
20. MEMORY Indicator (MEM) - MEM appears when the displayed channel is
programmed either in GS or OS Memory.
21. TONE SQUELCH Indicator (TSQ) - The TSQ icon will appear when the selected
channel is set to operate in Quiet Mode, or flashes when the radio is called using
SELCALL.
22. GROUP SCAN
Indicator
(GS) - The GS icon appears when Group Scan Mode is
activated. Open Scan is indicated by the absence of the GS icon.
4