Toro STX-38 Operator's Manual page 25

Figure 32
Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine so that the rear is slightly lower
than the front to ensure the oil drains completely.
3. Engage the parking brake and lower the
hydraulic lift.
g247313
4. Shut off the engine and remove the key.
5. Place a pan below the drain hose. Rotate the oil
drain valve to allow oil to drain
Figure 34).
1. Oil-drain valve
g194611
1. Oil-drain hose
6. When oil has drained completely, close the drain
valve.
25
(Figure 33
Figure 33
Figure 34
and
g024911
g024912