Cooling System Maintenance; Cleaning The Engine Screen - Toro STX-38 Operator's Manual

depleted, clean out all the grease, replace the
gasket, and add new grease.
7. Ensure that the road wheel turns smoothly on the
bearing. If it is frozen, contact your Authorized
Service Dealer to replace the road wheel.
8. Place the greased road wheel cap over the bolt
head (Figure 51).
9. Secure the road wheel cap with the snap ring
(Figure 51).
10. Repeat steps 5 through
11. Install each track guide to the traction unit frame
using the fasteners you removed previously.
Torque the bolts to 91 to 112 N∙m (67 to 83 ft-lb).
12. Install the tracks; refer to
(page 33).
9 for all road wheels.
Replacing the Tracks
Cooling System
Maintenance

Cleaning the Engine Screen

Service Interval: Before each use or daily
Before each use, remove any buildup of grass,
dirt, or other debris from the engine screen. This
helps ensure adequate cooling and correct engine
speed and reduces the possibility of overheating and
mechanical damage to the engine.
34
Figure 52
g247684