Weekly Cleaning - Zone 2; Ice Maker Sanitizing & Descaling - Zone 3 & 4 - Welbilt Multiplex FreshBlender Service Manual

Section 4

Weekly Cleaning - Zone 2

Zone 2 weekly cleaning is accessed through the cleaning
screen. The Cleaning screen appears after selected from the
Main Menu or when prompted to perform routine cleaning.
This screen's primary function is to perform routine
cleaning and sanitation of the machine. It covers the basic
components of the FreshBlender that will need cleaned on
a daily basis.
NOTE: The on-screen instructions can vary depending on
the firmware version of the machine and can vary slightly
per customer. All Zone 2 cleaning steps are covered in the
Installation Operation & Maintenance manual that ships
with the unit.
• Time to complete - 90 Minutes
1. This is done through the Employee, Managers, or
Service Screen options.
2. In the Cleaning screen select the button under WEEKLY.
NOTE: Failure to complete the weekly cleaning sequence
entirely will not reset the weekly cleaning timer and will
require the process to be repeated.
Part Number REV00 04/08/2020
Ice Maker Sanitizing & Descaling - Zone 3 & 4
Sanitizing is recommended every six (6) months. More
frequent sanitizing or descaling may be required in some
existing water conditions. Follow carefully any instructions
provided with the bottles of Ice Machine Descaling or
sanitizing solution.
n
Always wear liquid-proof gloves to prevent the descaling
and sanitizing solutions from coming into contact with skin.
NOTE: All steps will be displayed on screen.
• Time to complete - 2 hours
Descaling is a choice during Zone 3 Ice Maker Sanitizing. Or
can be performed by itself in Zone 4 Descaling.


IIportant
Only a trained manager or authorized technician
should access the service screens. If changes to these
settings are made incorrectly they can cause the unit to
malfunction or not work at all.
NOTE: Failure to complete the Zone 3 or 4 cleaning
sequence in its entirety could affect drink quality and will
not reset the cleaning timer which will require the process
to be repeated.
Maintenance
Warning
29