Welbilt Multiplex FreshBlender Instruction Sheet

Instruction Sheet
TOOLS REQUIRED
• Puncture Resistant Gloves
• Clean Bucket
• Clean Towels
• Drill (cordless recommended)
• Phillips Driver
PARTS REQUIRED
• 020007985 Water Filtration Kit
n
Power OFF the machine and unplug from power source,
this unit contains sharp moving parts. Wear gloves to
protect hands.


Important
Keep refrigeration cabinet door closed so product
remains chilled while unit is off.
Preparation
1. Review literature packet included with parts and filters.
2. Set Water Filtration Assembly, 2 Self-tapping Screws,
Pre-filter and Filter aside. (See Figure 1)
3. Locate power switch on top right of machine and power
the unit down. (See Figure 2)
4. Installation will be on back of machine. Without
breaking water or drain lines, carefully move machine
away from wall.
Disassembly
5. Disconnect water line from back of machine.
(See Figure 3)
Installation
6. Carefully hang Water Filtration Assembly on back of
machine without covering up the serial tag.
(See Figure 4)
Warning
Subject: FreshBlender Water Filtration Retrofit
SCOPE: ALL MULTIPLEX FreshBlenders
Document Number: 020007984 06/06/2019
MULTIPLEX
2100 FUTURE, SELLERSBURG, IN 47172
844-724-CARE
WWW.MULTIPLEXBEVERAGE.COM
FIGURE 1 - Parts
FIGURE 2 - Power
FIGURE 3 - Disconnect Water Line
FIGURE 4 - Assembly
1 of 3