Operation; External Component Identification; Sequence Of Operation; Normal Operation - Welbilt Multiplex FreshBlender Service Manual

External Component Identification

Sequence of Operation

NORMAL OPERATION

Drink Selection screen appears after power-up of the
unit. Operator presses one of the drink type buttons on
the Drink Selection screen, and the Flavor Options screen
appears. Once a flavor is selected a confirmation screen will
appear. When the user confirms the selection the on screen
instructions for cup location and drink size will then display.
See "Product Dispense Operation" on page 20.
With correct cup in place, the drink preparation sequence
commences when "Start Drink Size" is initiated through the
touch screen. The machine dispenses product and ice into
the cup in the dispense area. The cup is then placed into
isolated the blend chamber by the automatic shuttle system.
Part Number REV00 04/08/2020
Front Panel
Keyed Lock
Product
Dispense Area
Drink Shuttle
& Rail
Product Bins
(Inside Cabinet)
Section 3

Operation

The machine blends the drink for the correct time at the
proper blender speed. If add-ins are required for the drink
after blending, the user will be prompted. The blender
completes the blend sequence and the shuttle system
moves the completed drink back into the dispense area
where the customer can now retrieve it.
After the drink is removed the automatic rinse of the
blender and dispense area initiates. The Drink Selection
screen re-appears.
Default Temperature
Control Setting
Power Switch
Touch Screen
Clear Splash
Shield &
Blending
Area
Refrigerated
Cabinet Door
34°F/1°C set point
4°F/.5°C differential
controlled by software
19