Displaying Temperatures For Modules - Cisco Nexus 7710 Site Preparation And Hardware Installation Manual

Table of Contents

Advertisement

Managing the Switch
10
Arbiter (s4)
10
CPU1CORE1(s5)
10
CPU1CORE2(s6)
10
CPU1CORE3(s7)
10
CPU1CORE4(s8)
10
CPU2CORE1(s9)
10
CPU2CORE2(s10)
10
CPU2CORE3(s11)
10
CPU2CORE4(s12)
10
DDR3DIMM1(s13)
10
DDR3DIMM2(s14)
10
DDR3DIMM4(s16)
10
DDR3DIMM5(s17)
switch#

Displaying Temperatures for Modules

Each supervisor, I/O, and fabric module has temperature sensors with two thresholds:
• Minor temperature threshold—When a minor threshold is exceeded, a minor alarm occurs and the
• Major temperature threshold—When a major threshold is exceeded, a major alarm occurs and the following
OL-30452-01.
125
85
85
85
85
85
85
85
85
95
95
95
95
following actions occur for all four sensors:
• Displays system messages
• Sends Call Home alerts (if configured)
• Sends SNMP notifications (if configured)
actions occur:
• For sensors 1, 3, and 4 (outlet and onboard sensors), the following actions occur:
• Displays system messages.
• Sends Call Home alerts (if configured). For more information, refer
with a Destination Profile
• Sends SNMP notifications (if configured). For more information, refer
Notifications.
• For sensor 2 (intake sensor), the following actions occur:
• If the threshold is exceeded in a switching module, only that module is shut down.
• If the threshold is exceeded in an active supervisor module with HA-standby or standby present,
only that supervisor module is shut down and the standby supervisor module takes over.
• If you do not have a standby supervisor module in your switch, you have up to 2 minutes to
decrease the temperature. During this interval, the software monitors the temperature every 5
seconds and continuously sends system messages as configured.
Cisco Nexus 7710 Switch Site Preparation and Hardware Installation Guide
105
61
Ok
75
41
Ok
75
37
Ok
75
39
Ok
75
38
Ok
75
26
Ok
75
23
Ok
75
24
Ok
75
22
Ok
85
30
Ok
85
28
Ok
85
25
Ok
85
26
Ok
.
Displaying Temperatures for Modules
Associating an Alert Group
Enabling SNMP
57

Advertisement

Table of Contents
loading

Table of Contents