Additional Information; Changing The Digital Security Code - Uniden WDECT 2310 Quick Start Manual

Uniden owner's manual cordless telephone wdect 2310

Hide thumbs Also See for WDECT 2310:

Table of Contents

UP306EH (WDECT2310) ENG OM

The digital security code is an identification code used to connect the handset and the

base unit. Normally, setting the code is not necessary. In the rare situation that you

suspect another cordless telephone is using the same security code, you can change the

code. To change the digital security code:

1. Perform the "System Reset" menu options ("Deregister the Handset" and

"Deregister the Base Setting") for the handset you have (see page 19).

2. To register the handset do the following steps:

1) Place a handset in the base.

2) Registration starts automatically.

While registering "

3) When the registration is complete, "

the display.

If the registration fails, "

above again.

1/21/04

8:53 AM

Page 39

" appears in the display.

" appears in the display. Try the steps

" appears in

[ 39 ]

Table of Contents