Uniden WDECT 2310 Quick Start Manual page 24

UP306EH (WDECT2310) ENG OM
For setting the Day
and Time, the idle
time-out is extended
to 2 minutes.
[ 18 ]
1/21/04 8:51 AM Page 18
Global Setup
Setting Name Tag (POP ID)
1) Enter the " " menu, then the "
" submenu (see "Entering the Menu" on page 14).
L M
2) Press / or to change the selection, "
or " ".
3) Press the OK soft key. You will hear a confirmation tone.
Setting Day and Time
1) Enter the " " menu, then the "
" submenu (see "Entering the Menu" on page 14).
L M
2) Press / or to select the day of the week,
then press the NEXT soft key.
3) Press the number keypad (0-9) to set the time, then
press the NEXT soft key.
L M
4) Press / or to choose "
hear a confirmation tone.
Setting Insert Zero (New Zealand only)
1) Enter the " " menu, then the "
" submenu (see "Entering the Menu" on page 14).
L M
2) Press / or to change the selection, "
or " ".
3) Press the OK soft key. You will hear a confirmation tone.
"
" or " ", then press the OK soft key. You will
"