Table of Contents
Advertisement
UP306EH (WDECT2310) ENG OM
Symptom
Severe noise interference.
The Caller ID does not display.
Voice Message Indication
does not work.
You cannot register the
handset at the base.
Can not exit the DirectLink mode • Place the handset in the charging cradle to cancel the DirectLink mode.
If you still have a problem.
[ 42 ]
1/21/04
8:53 AM
Page 42
Suggestion
• Keep the handset away from microwave ovens, computers,
remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID
service is current.
• Contact your local telephone company to make sure that your
telephone receives FSK message signaling.
• Please make sure your batteries are charged at least 10 minutes.
• Remove the base ID and register the handset (see "Deregister the
Base Setting" on page 19).
• Check our web site for the latest information and frequently
asked questions.
www.uniden.com.au
www.uniden.co.nz
Advertisement
Table of Contents
