Related Manuals for Ozito BSW-2581U
Summary of Contents for Ozito BSW-2581U
- Page 1 BSW-2581U Original operating instructions Band Saw Art.-Nr.: 43.080.17 I.-Nr.: 11016 Anl_BSW_2581U.indb 1 Anl_BSW_2581U.indb 1 20.01.2017 11:03:19 20.01.2017 11:03:19...
- Page 2 - 2 - Anl_BSW_2581U.indb 2 Anl_BSW_2581U.indb 2 20.01.2017 11:03:19 20.01.2017 11:03:19...
- Page 3 - 3 - Anl_BSW_2581U.indb 3 Anl_BSW_2581U.indb 3 20.01.2017 11:03:20 20.01.2017 11:03:20...
- Page 4 37 37 - 4 - Anl_BSW_2581U.indb 4 Anl_BSW_2581U.indb 4 20.01.2017 11:03:24 20.01.2017 11:03:24...
- Page 5 - 5 - Anl_BSW_2581U.indb 5 Anl_BSW_2581U.indb 5 20.01.2017 11:03:28 20.01.2017 11:03:28...
- Page 6 - 6 - Anl_BSW_2581U.indb 6 Anl_BSW_2581U.indb 6 20.01.2017 11:03:33 20.01.2017 11:03:33...
- Page 7 - 7 - Anl_BSW_2581U.indb 7 Anl_BSW_2581U.indb 7 20.01.2017 11:03:37 20.01.2017 11:03:37...
- Page 8 Danger! Read the operating instructions to reduce the risk of inquiry Caution! Wear ear-muff s. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials.
-
Page 9: Safety Regulations
25. Machine frame Danger! 26. Blade When using the equipment, a few safety pre- 27. Tilt guard cautions must be observed to avoid injuries and 28. Guide pin, top damage. Please read the complete operating 29. Guide pin, bottom instructions and safety regulations with due care. 30. -
Page 10: Proper Use
• Danger! Damage to hearing if ear-muffs are not used The equipment and packaging material are as necessary. • not toys. Do not let children play with plastic Harmful emissions of wood dust when used bags, foils or small parts. There is a danger of in closed rooms. -
Page 11: Before Starting The Equipment
6. Assembly Wear ear-muff s. The impact of noise can cause damage to hea- ring. CAUTION! Pull out the power plug before carrying out any Keep the noise emissions and vibrations to a maintenance, resetting or assembly work on the minimum. - Page 12 clockwise direction. The blade (26) should run gullet of the blade in front. • with its teeth at the front edge of the tire on Re-tighten the Socket head screw (35). • the blade pulley (8). If not, the tilt angle of the CAUTION! The blade will be rendered usel- upper blade pulley (8) must be corrected.
-
Page 13: Control Elements
• 6.6. Adjusting the saw table (15) to 90° Close the side cover (12) again. • (12/13) Mount the web panel (4) again. • • Slacken the locking grip (18) and the locking Refit the cover. lever (56) and open the cover at the blade guide (11). -
Page 14: Operation
7.2. Parallel stop (Figure 18) Important! When handling narrower workpieces, • Push the clip (21) on the parallel stop (24) it is essential to use a push stick. The push stick upwards. (28) must always be kept close at hand at the •... -
Page 15: Disposal And Recycling
There are no parts inside the equipment which require additional maintenance. 10.3 Spare parts: Spare parts can be ordered from the Special Orders Desk at your local Ozito-diy.co.uk Bunnings Warehouse or Homebase store. For further information, or any parts visit www.ozito-diy.co.uk... - Page 16 For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g.
-
Page 17: Service Information
Service information Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. Category Example Wear parts* Guide roller, V-belt Consumables* Bandsaw blade Missing parts * Not necessarily included in the scope of delivery! - 17 -... -
Page 18: Warranty Certificate
- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device. OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG - 18 - Anl_BSW_2581U.indb 18 Anl_BSW_2581U.indb 18... - Page 19 ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar explains the following conformity according to EU directives and norms for the following product Bandsaw BSW-2581U (Ozito) 2014/29/EU 2006/42/EC Annex IV 2005/32/EC_2009/125/EC Notifi ed Body: TÜV Product Service Gmbh 2014/35/EU Notifi ed Body No.: 0123 Reg.
- Page 20 EH 01/2017 (01) Anl_BSW_2581U.indb 20 Anl_BSW_2581U.indb 20 20.01.2017 11:03:39 20.01.2017 11:03:39...
Need help?
Do you have a question about the BSW-2581U and is the answer not in the manual?
Questions and answers