Setting.the.number.of.rings; Setting.the.day.&.Time - Uniden TRU12803 Series Owner's Manual

Setting the Number of Rings
The.ring.time.setting.allows.you.to.set.the.number.of.rings.the.caller.hears.before.your.answering.system.plays.the.
outgoing.message..You.can.set.the.ring.time.to.answer.after.two,.four,.or.six.rings..If.you.enable.the.Toll.Saver.(TS).
setting,.the.answering.system.picks.up.after.two.rings.if.you.have.new.messages,.and.after.four.rings.if.there.are.
none..This.way,.if.you.make.a.long.distance.call.to.check.your.messages,.you.can.hang.up.after.the.second.ring.to.
avoid.long.distance.billing.charges.
From the handset:
) Press.[menu/clear]..Select.the.ANSW..SETUP.menu,.and.then.the.RING.TIME.submenu.
2) Move.the.cursor.to.select.a.ring.time.(TOLL.SAVER,.2.TIMES,.4.TIMES,.or.6.TIMES).
]. You will hear a confirmation tone.
3) Press.[select/
Setting the Day & Time
If.you.do.not.set.the.clock.on.your.answering.system,.your.messages.may.not.have.the.correct.time.and.day.stamp..
From the handset:
) Press.[menu/clear].
2) Move.the.cursor.to.ANSW..SETUP.and.press.[select/
3) Move.the.cursor.to.DAY.&.TIME.and.press.[select/
] and.[ ].to.select.the.day.of.the.week,.and.press.[select/
4) Use.[
5) Use.the.number.keypad.([0].through.[9]).to.select.the.hour.and.minutes.
] and.[ ].to.select.AM.or.PM,.and.press.[select/
6) Use.[
].
].
].
]. You hear a confirmation tone.
38