Removing Transport Securing; Device; Establishing Power Supply; Inserting And Connecting The Battery Block - Seca 757 Instruction Manual And Guarantee

4.2 Removing transport securing device

4.3 Establishing power supply

Inserting and
connecting the battery
1. Carefully turn over the scale so that the base plate
is facing upwards.
2. Undo the screws of the transport securing device.
3. Remove the transport securing device
NOTE
Keep the transport securing device for
transporting the scale at a later date.
The scale is powered by a battery block or a power
pack (both included in scope of supply). Depending on
model, the scope of supply will include either a power
pack with plug adapters or a power pack with a fixed
Euro connector.
The battery compartment and the connecting socket
for the power pack are located on the underside of the
scale.
1. Push the battery compartment latch in the direction
of the printed word "Battery" and flip open the lid.
block
2. Remove the connecting cable from the battery
compartment.
3. Connect the plug contacts of the connecting cable
to the battery block supplied.
4. Insert the battery block in the battery compartment.
5. Close the battery compartment.
Before you get started ... • 57
English