Changing The Digital Security Code - Uniden EXL 8945 Owner's Manual

If the handset battery pack
is completely discharged
or the battery pack
removed, the digital
security code is erased.
If this happens, a new
security code is set
automatically the next
time the battery pack is
charged.

Changing the digital security code

The digital security code is an identification code used to connect
the handset and the base unit. Normally, setting the code is not
necessary.
The first time you charge your handset, the security code is
automatically set. (See page 3.)
In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1
Remove the handset from the base
int'com
unit. Press
2
While the handset is producing the
paging sound, hold
placing the handset in the base unit.
The paging tone stops.
Leave the handset on the base for at
least 3 seconds. A new, random
security code is set.
.
int'com while
26