Storing Phone Numbers - Uniden EXL 8945 Owner's Manual

You must press a key
within 20 seconds or the
phone will return to
standby. If you return the
handset to the cradle, the
phone will return to
standby too. Press
and you can
memory
go to memory menu at
any time.

Storing phone numbers

Your EXL 8945 stores up to 10 numbers in handset plus 10
numbers in the base.
On the handeset
On the base
status LED
When entering numbers, you may press
enter a pause in the dialing sequence.
NOTES
You cannot store phone numbers directly into the
one-touch dial keys. See page 21 for one touch
NOTES
dialing.
1
Press and hold
standby mode.
2
Enter the number you wish to store
(up to 20 digits)
3
Press memory
4
Press the to
0
to select the memory location you
wish to store the number.
5
The confirmation beep indicates the
number has been stored.
1
memory
Press
The status LED blinks.
2
Dial the number you wish to store.
3
Press memory
Press to
0 9
select the memory location you wish
to store the number.
The status LED goes out.
A confirmation beep indicates the
number is stored.
memory in the
again.
on the keypad
9
.
.
on the keypad to
to
redial/p
20